Suzuki GW250 Service Manual page 131

• Hold the clutch sleeve hub with the special tool.
 09920-53740: Clutch sleeve hub holder
• Tighten the clutch sleeve hub nut to the specified torque.
 Clutch sleeve hub nut: 50 N·m (5.0 kgf-m, 36.0 lbf-ft)
• Bend the lock washer 5 securely.
• Install the clutch push rod 6 into the countershaft.
• Apply engine oil to the bearing 8.
• Install the clutch push piece 7, bearing 8 and thrust washer
9 to the countershaft.
NOTE:
Thrust washer 9 is located between the pressure plate and
bearing 8.
• Install the spring washer seat 0 and spring washer A onto
the clutch sleeve hub correctly.
ENGINE 3-83