Suzuki GW250 Service Manual page 127

• Install the generator cover 3 and tighten the generator cover
bolts to the specified torque.
 Generator cover bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)

Be careful not to pinch finger between the generator
cover and crankcase.
GEARSHIFT SYSTEM
• Install the gearshift cam stopper 1, its bolt 2, washer 3 and
return spring 4.
• Tighten the gearshift cam stopper bolt 2 to the specified
torque.
 Gearshift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
NOTE:
Hook the return spring end A to the gearshift cam stopper 1.
• Check the gearshift cam stopper 1 moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate 5.
NOTE:
Align the gearshift cam pins B with the gearshift cam stopper
plate holes C.
• Apply a small quantity of thread lock to the gearshift cam
stopper plate bolt 6 and tighten it to the specified torque.
 99000-32110: THREAD LOCK CEMENT SUPER "1322"
 Gearshift cam stopper plate bolt:
or equivalent
11 N·m (1.1 kgf-m, 8.0 lbf-ft)
ENGINE 3-79