Suzuki GW250 Service Manual page 64

3-16 ENGINE
CLUTCH COVER
• Remove the clutch cover 1.
• Remove the dowel pins 2 and gasket 3.
CLUTCH
• Remove the clutch spring bolts and clutch springs.
NOTE:
Loosen the clutch spring set bolts little by little and diagonally.
• Remove the clutch pressure plate 1.
• Remove the clutch drive plates 2 and driven plates 3.
NOTE:
Prior to removal, mark each plates original position with a paint
or scribe for accurate reinstallation.
• Remove the spring washer 4 and its seat 5.