Ect Sensor Inspection; Ect Sensor Removal And Installation; Iat Sensor Inspection; Iat Sensor Removal And Installation - Suzuki GW250 Service Manual

4-92 FI SYSTEM DIAGNOSIS

ECT SENSOR INSPECTION

The ECT sensor 1 is installed at the thermostat connector.
(7-10)

ECT SENSOR REMOVAL AND INSTALLATION

• Remove the ECT sensor 1. (7-9)
• Install the ECT sensor in the reverse order of removal.
 ECT sensor: 18 N·m (1.8 kgf-m, 13.0 lbf-ft)

IAT SENSOR INSPECTION

The IAT sensor 1 is installed in front of the air cleaner box.
(4-46)

IAT SENSOR REMOVAL AND INSTALLATION

• Disconnect the IAT sensor coupler 2 and remove the IAT
sensor 1.
• Install the IAT sensor in the reverse order of removal.

TO SENSOR INSPECTION

The TO sensor 1 is located under the pillion rider handle.
(4-50)

TO SENSOR REMOVAL AND INSTALLATION

• Remove the seat. (8-5)
• Remove the band 2 and move the ECM 3 forward.
• Dismount the TO sensor 1 from its bracket and disconnect
the TO sensor coupler 4.
• Install the TO sensor in the reverse order of removal.
(10-39)
NOTE:
When installing the TO sensor, the arrow mark A must be
pointed upward.