Brake/Tail Light - Suzuki GW250 Service Manual

BRAKE/TAIL LIGHT

Brake/Tail light 1: 12 V 21/5 W
When you touch the bulb with your bare hands, clean the bulb with a cloth moistened with alco-
hol or soapy water to prevent premature bulb failure.
NOTE:
Do not use bulb other than those with predetermined wattage.
BRAKE/TAIL LIGHT BULB REPLACEMENT
• Remove the lens 1.
• Push in on the brake/tail light bulb 2, turn it counterclockwise,
and pull it out.
• Replace the brake/tail light bulb 2.
ELECTRICAL SYSTEM 9-39