Suzuki GW250 Service Manual page 123

OIL PAN
• Install a new gasket 1.
• Install the oil pan 2.
NOTE:
Fit the clamp to the oil pan bolts A.
• Tighten the oil pan bolts diagonally to the specified torque.
 Oil pan bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
ENGINE SPROCKET SPACER
• Apply grease to the new O-ring and oil seal lip.
 99000-25010: SUZUKI SUPER GREASE "A"
• Install the engine sprocket spacer 1.
NOTE:
The grooved A side of the engine sprocket spacer 1 must face
crankcase side.
CRANKCASE BREATHER COVER
• Install a new gasket 1 and tighten the breather cover 2.
 Breather cover bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
OIL FILTER
• Apply engine oil lightly to the gasket.
• Install oil filter with the special tool. (2-12)
 09915-40620: Oil filter wrench
 Oil filter: 20 N·m (2.0 kgf-m, 14.5 lbf-ft)
or equivalent
ENGINE 3-75