Tp Reset - Suzuki GW250 Service Manual

5-22 FUEL SYSTEM AND THROTTLE BODY

TP RESET

When replacing the throttle body assembly or TP sensor with a
new one or reinstalling the TP sensor, reset the TP fully closed
learned value in the following procedures:
1) Set up the SDS tool. (4-24)
2) Turn the ignition switch ON.
3) Click "Active control".
4) Click "TP fully closed learned value reset" 1.
5) Click "Reset" button 2 to clear the TP fully closed learned
value.
NOTE:
The learned value of the TP sensor is set at RESET position.
6) Close the SDS tool.
7) Turn the ignition switch OFF position.
NOTE:
The TP sensor opening initialization is automatically started
after the ignition switch is turned OFF.