Suzuki GW250 Service Manual page 141

Table of Contents

Advertisement

• Install new gasket 1 to the cylinder head cover.
• Apply bond to the cam end caps of the gaskets as shown.
 99000-31140: SUZUKI BOND No.1207B or equivalent
• Place the cylinder head cover on the cylinder head.
• Apply engine oil to both sides of the new gaskets 2.
• Fit a new gasket 2 to each head cover bolt.
• Tighten the cylinder head cover bolts to the specified torque.
 Cylinderhead cover bolt:
Initial: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
Final : 14 N·m (1.4 kgf-m, 10.0 lbf-ft)
• Tighten the cylinder head cover cap bolts to the specified
torque.
 Cylinder head cover cap bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
• Install the spark plug. (2-7)
ENGINE 3-93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gw250l3

Table of Contents