Turn Signal Light - Suzuki GW250 Service Manual

9-40 ELECTRICAL SYSTEM

TURN SIGNAL LIGHT

Turn signal light 1: 12 V 10 W
When you touch the bulb with your bare hands, clean the bulb with a cloth moistened with alco-
hol or soapy water to prevent premature bulb failure.
NOTE:
Do not use bulb other than those with predetermined wattage.
FRONT TURN SIGNAL LIGHT BULB REPLACEMENT
NOTE:
The right and left front turn signal light bulbs are installed sym-
metrically and therefore the replacement procedure for one side
is the same as that for the other side.
• Remove the fuel tank cover. (8-5)
• Remove the bulb socket 1 by turning it counterclockwise.
• Push in on the front turn signal light bulb 2, turn it counter-
clockwise, and pull it out.
• Replace the front turn signal light bulb 2.