Suzuki GW250 Service Manual page 57

• Tighten the gearshift link arm bolt 3 to the specified torque.
 Gearshift link arm bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
• Inspect the gearshift lever height D between the gearshift
lever top and footrest.
 Gearshift lever height:
• Install the engine sprocket 4 with drive chain 5.
• Apply engine oil to the driveshaft thread portion.
• Tighten the engine sprocket nut 6 to the specified torque.
 Engine sprocket nut: 120 N·m (12.0 kgf-m, 87.0 lbf-ft)
• Tighten the speed sensor rotor bolt 7 to the specified torque.
 Speed sensor rotor bolt: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
• Tighten the speed sensor bracket bolts 8 to the specified
torque.
 Speed sensor bracket bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
Standard: 28 – 38 mm (1.1 – 1.5 in)
Gearshift lever
ENGINE 3-9
Footrest