Suzuki GW250 Service Manual page 130

3-82 ENGINE
• Apply engine oil to the inside and outside surface of the
spacer 1.
• Install the spacer 1 onto the countershaft.
NOTE:
The chamfer side A of spacer 1 crankcase inside.
• Install the primary driven gear assembly 2 onto the
countershaft.
NOTE:
* Be sure to engage the oil pump drive sprocket with the primary
driven gear sprocket.
* When engaging the primary drive gear and primary driven
gears B, turn the primary driven gear assembly 2 to the
counterclockwise.
• Install the thrust washer 3.
• Install the clutch sleeve hub 4 onto the countershaft.
• Install the new lock washer 5.