Removal And Disassembly - Suzuki Madura GV700GL Service Manual

4-3 SHAFT DRIVE
REMOVAL AND DISASSEMBLY
SECONDARY GEAR CASE
• Remove the rear wheel. (See page 9-25)
• Remove the final gear case. (See page 4-22)
• Slide the propeller shaft backward.
• Remove the secondary gear case cover.
• Remove the gearshift lever with the footrest by
removing the bolts.
• Remove the generator cover.
NOTE:
When removing the generator cover, remove
the oil drain plug to drain out engine oil.
• Remove the clutch hydraulic line by removing
the union bolt.
NOTE:
Completely wipe off any clutch fluid adhering
to any part of motorcycle. The fluid reacts
chemically with paint, plastics, rubber mate-
rials, etc.
• Loosen the boot clamp and slide the boot from
the secondary gear case.
• Place an oii pan under the secondary gear case
and remove. the oil drain plug to drain out gear
oil.
• Remove the secondary gear case from the
crankcase by removing the five bolts.