< Previous Next >
2011 - RX-8 - Body and Accessories
AUDIO AMPLIFIER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Console (See
b. Rear seat (See
c. Tire house trim (See
d. Rear pillar trim (See
e. Rear package side trim (See
f. Rear package center trim (See
3. Remove in the order indicated in the table.
1Bolt
2Audio amplifier
3Connector
CONSOLE
REMOVAL/INSTALLATION.)
REAR SEAT
REMOVAL/INSTALLATION.)
TIRE HOUSE TRIM
REAR PILLAR TRIM
REAR PACKAGE TRIM
REAR PACKAGE TRIM
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)