< Previous Next >
2011 - RX-8 - Body and Accessories
CONDENSER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Rear seat (See
b. Console (See
c. Tire house trim (See
d. Rear pillar trim (See
e. Rear package side trim (See
f. Rear package center trim (See
3. Remove in the order indicated in the table.
1Bolt
REAR SEAT
REMOVAL/INSTALLATION.)
CONSOLE
REMOVAL/INSTALLATION.)
TIRE HOUSE TRIM
REAR PILLAR TRIM
REAR PACKAGE TRIM
REAR PACKAGE TRIM
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)