Quick Start; Figure 1-9 Mx8 Desktop - LXE MX8 Reference Manual

Quick Start

Quick Start
Note:
This section's instructions are based on the assumption that your new device is pre-configured and
requires only accessory installation (e.g. trigger handle) and a power source. LXE recommends
that installation or removal of accessories be performed on a clean, well-lit surface. When
necessary, protect the work surface, the mobile device, and components from electrostatic
discharge.
In general, the sequence of events is:
1. Insert a fully charged battery. (Always put a fully charged battery in the mobile device at the
beginning of the shift or workday.)
2. Connect an external power source to the unit (if available).
3. If the screen does not automatically display, tap the Power key.
4. Calibrate the touchscreen.
5. A white screen will appear during the boot process until all CAB files and applications are
loaded and installed. Wireless client setup screens may appear and disappear while files are
loading.
6. After all files are loaded and the Microsoft Windows CE Desktop is displayed, adjust audio
volume and other parameters if desired.
7. Pair Bluetooth devices.
8. Setup wireless client parameters.
9. Setup terminal emulation parameters.
10. Setup mappable keys.
11. Save changed settings to the registry.
If needed, change the Time and Date from it's default value by tapping the
Panel | Date/Time icon.
E-EQ-MX8RG-A
When your mobile device is pre-configured, the client, keypad and scan aperture
configurations are assembled by LXE to your specifications. The desktop will display a
Summit Client Utility icon.

Figure 1-9 MX8 Desktop

11
| Settings | Control
MX8 Reference Guide