LXE MX8 Reference Manual page 240

226
Message
Keyboard hook initialization failure
Keyboard hook loaded OK
L after Ctrl
Loading keyboard hook
Open failure
Open registry failure
Opened status file
Out of memory for encrypted pwd
pRealTaskbarWndProc already set
Pwd cancelled or invalid-remain in
user mode
Read registry error-hot key
Read registry failure-app name
Read registry failure-Cmd Line
Read registry failure-Internet
Registering Backdoor MSG
Registering Hotkey MSG
MX8 Reference Guide
Explanation and/or corrective action
The keyboard filter initialization failed.
The keyboard hook dll exists and loaded successfully.
Processing the backdoor entry.
When AppLock first loads, it loads a dll that contains
the keyboard hook processing. This message is logged
prior to the load attempt.
The status information is being saved to a file and the
file open has failed. This could occur if the file is write
protected. If the file does not exist, it is created.
If the Administration registry key does not exist, the
switch to user mode fails because the AppName value in
the Administration key is not available.
The status information is being saved to a file and the
file has been opened successfully.
Not enough memory to encrypt the password.
The taskbar control has already been installed.
The password prompt was cancelled by the user or the
maximum number of failed attempts to enter a password
was exceeded.
The hotkey registry entry is missing or empty. This is
not considered an error. The keyboard hook uses an
embedded default if the value is not set in the registry.
AppName registry value does not exist or is empty.
This constitutes a failure for switching into user mode.
AppCommandLine registry entry is missing or empty.
This is not considered an error since command line
information is not necessary to launch and lock the
application.
The Internet registry entry is missing or empty. This is
not considered an error since the Internet value is not
necessary to launch and lock the application.
The AppLock system communicates with the keyboard
hook via a user defined message. Both AppLock.exe
and Kbdhook.dll register the message at initialization.
The AppLock system communicates with the keyboard
hook via a user defined message. Both AppLock.exe
and Kbdhook.dll register the message at initialization.
Error Messages
Level
LOG_ERROR
LOG_EX
LOG_EX
LOG_PROCESSING
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_PROCESSING
LOG_PROCESSING
E-EQ-MX8RG-A