10
Quick Start
Note:
This section's instructions are based on the assumption that your new system is pre-configured
and requires only accessory installation (e.g. handstrap) and a power source. LXE recommends
that installation or removal of accessories be performed on a clean, well-lit surface. When
necessary, protect the work surface, MX7, and components from electrostatic discharge.
In general, the sequence of events is:
1. Insert a fully charged battery. (Always put a fully charged battery in the MX7 at the
2. Connect an external power source to the unit (if available).
3. If the screen does not automatically display, tap the Power key.
4. Calibrate the touchscreen (OS versions released before August 2008 only).
5. A white screen will appear during the boot process until all CAB files and applications are
6. After all files are loaded and the Microsoft Windows CE Desktop is displayed, adjust
7. Pair Bluetooth devices.
8. Setup wireless client parameters.
9. Setup terminal emulation parameters.
10. Setup mappable keys.
11. Save changed settings to the registry.
If needed, change the Time and Date from its default value by tapping the
Panel | Date/Time icon.
MX7 Reference Guide
When your mobile device is pre-configured, the network card, keypad and scan aperture
configurations are assembled by LXE to your specifications. The desktop will display an
Odyssey Client Utility icon or it will display a Summit Client Utility icon.
beginning of the shift or workday.)
loaded and installed. Client device setup screens may appear and disappear while files are
loading.
audio volume and other parameters if desired.
MX7 with Odyssey Client
MX7 with Summit Client
Figure 1-7 MX7 Desktop
Quick Start
| Settings | Control
E-EQ-MX7RG-L-ARC