Com1 Tab - LXE MX8 Reference Manual

COM1 Tab

COM1 Tab
Access:
Integrated laser scanner default values are 9600 Baud, 8 data bits, 1 stop bit and No parity.
If these values are changed, the default values are restored after a cold boot or reflashing.
Note:
E-EQ-MX8RG-A
| Settings | Control Panel | Scanner | COM1 tab
Factory Default Settings
COM1 Port (external serial port)
Baud Rate 9600
Stop Bits 1
Parity None
Data Bits 8
Figure 4-3 Scanner Control / COM1
COM1 does not support 5V switchable power on Pin 9 for tethered scanners.
147
MX8 Reference Guide