Global Tab; Custom Parameter Option; Global Parameters - LXE MX8 Reference Manual

Summit Client Configuration

Global Tab

The parameters on this panel can only be changed when an Admin is logged in with a password.
The current values for the parameters can be viewed by the general user without requiring a
password.
Note:

Custom Parameter Option

LXE does not support the parameter Custom option. The parameter value is displayed as
"Custom" when the operating system registry has been edited to set the Summit parameter to a
value that is not available from the parameter's drop down list. Selecting Custom from the drop
down list has no effect. Selecting any other value from the drop down list will overwrite the
"custom" value in the registry.

Global Parameters

Parameter
RX Diversity
E-EQ-MX8RG-A
Tap the Commit button to save changes. If the panel is exited before tapping the Commit
button, changes are not saved!
Figure 5-8 SCU – Global Tab
Default
On-start on Main
Factory Default Settings
RX Diversity
TX Diversity
Roam Trigger
Roam Delta
Roam Period
BG Channel Set
Aggressive Scan
Frag Threshold
RTS Threshold
Ping Payload
Ping Timeout
Ping Delay ms
LED
Hide Passwords
Auth Timeout
Admin Password
Certs Path
CCX
WMM
Tray Icon
Function
How to handle antenna diversity when receiving
packets from the Access Point.
Options are: Main Only (use the main antenna only),
Aux Only (use the auxiliary antenna only), On-start on
Main (on startup, use the main antenna), or On-start on
Aux (on startup, use the auxiliary antenna).
175
On-Start on Main
On
-65 dBm
10 dBm
10 sec.
Full
On
2346
2347
32 bytes
5000
1000
Off
Off
8 seconds
SUMMIT or blank
System
Off
Off
On
MX8 Reference Guide