Com1; Figure 3-18 Com1 - LXE MX8 Reference Manual

92

COM1

Access:
COM1 port default values are 9600 Baud, 8 data bits, 1 stop bit and No parity.
If these values are changed, the default values are restored after a cold boot or reflashing.
Note:
See Also:
MX8 Reference Guide
| Settings | Control Panel | COM1
Factory Default Settings
COM1 (I/O port)
Baud Rate 9600
Stop Bits 1
Parity None
Data Bits 8
COM1 does not support 5V switchable power on Pin 9 for tethered scanners.
Chapter 4 - Scanner
Settings | Control Panel Options

Figure 3-18 COM1

E-EQ-MX8RG-A