Quick Start; Troubleshooting; Accessing Files On A Compactflash Card - LXE MX5 User Manual

Rugged, portable, hand-held computer

Hide thumbs Also See for MX5:

Table of Contents

Quick Start

This section's instructions are based on the assumption that your new system is pre-configured and

requires only accessory installation (e.g. hand strap) and a power source.

Use this guide as you would any other source book -- reading portions to learn about the MX5,

and then referring to it when you need more information about a particular subject. This guide

takes you through an introduction to and operation of the LXE MX5.

In general, the sequence of events is:

1. Insert a fully charged battery. (Always put a fully charged battery in the MX5 at the

beginning of the shift or workday.)

2. Connect an external power source to the unit (if required).

3. If the screen does not automatically display, tap the Power key.

4. Calibrate the touchscreen.

5. After all files are loaded and the Desktop is displayed, adjust audio volume and other

parameters if desired.

If the mobile device has AppLock installed, please refer to "MX5 Reference Guide",

"Chapter 4 – AppLock" for setup and processing information before continuing.

Can't align the screen, change the

date/time or adjust the volume.

Flash folder. The CompactFlash socket is located in a recess underneath the MX5's main battery.

If you need to set up the integrated scanner (SE1223 or SE2223) barcode reading

parameters, please refer to the

Manuals CD or the LXE website.

MX5 User's Guide

Important

AppLock is installed and running on the mobile device.

AppLock restricts access to the control panels. Contact

your System Administrator.

"Integrated Scanner Programming

Quick Start

Guide" on the LXE

E-EQ-MX5PCOGWW-G-ARC

Table of Contents