Related Manuals for LXE MX9
Summary of Contents for LXE MX9
- Page 1 Draft 01 - For review only - Do not publish or distribute - LXE Confidential MX9 User Guide E-EQ-MX9OGWW-C 2010 Copyright© by LXE®, Inc, An EMS Technologies Company. All Rights Reserved.
- Page 2 Summit Data Communications, Inc. Summit Data Communications, the Summit logo, and “The Pinnacle of Performance” are trademarks of Summit Data Communications, Inc. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LXE, Inc. is under license.
-
Page 3: Table Of Contents
How To Connect or Remove the Battery Pack Insert/Replace Battery Remove Battery Hotswap the Main Battery Regulatory Notices and Safety Information Class B Digital Device RF Notices Laser Light Safety Statement Index E-EQ-MX9OGWW-C Draft 01 [ i ] MX9 User Guide... -
Page 4: Components
3. Speaker 4. Scan buttons 5. Enter key 6. Scanner status LED 7. Power key Note: The above list is the same on the 38 key MX9. Special keys are listed below. E-EQ-MX9OGWW-C Draft 01 [ 1 ] MX9 User Guide... - Page 5 Front For review only - Do not publish or distribute - LXE Confidential - Draft 01 Special Purpose Keys 1. Function Keys 2. Cursor up and down Keys 3. Diamond 1 key 4. Backspace [BS] key and Space [SPC] key 5.
-
Page 6: Top
For review only - Do not publish or distribute - LXE Confidential - Draft 01 Special Purpose Keys - 38 Key 1. Function keys 2. Tab | Space | Backspace keys 3. Diamond 2 key 4. Orange key 5. Escape [ESC] key 6. -
Page 7: Bottom
Bottom For review only - Do not publish or distribute - LXE Confidential - Draft 01 Bottom Input / Output Connector Tethered boot cover (covers I/O connector) not shown Back Battery Bay 1. Battery Terminals 2. Battery Bay 3. Battery Bay Access Tab... -
Page 8: Handstrap
Handstrap For review only - Do not publish or distribute - LXE Confidential - Draft 01 Handstrap 1. Handstrap 2. Handstrap Base 3. Stylus 1. Attach - Upper Handstrap Base 2. Attach - Lower Handstrap Base 1. Handstrap connector, upper 2. -
Page 9: Label Locations
Label Locations For review only - Do not publish or distribute - LXE Confidential - Draft 01 Label Locations 1. Laser Warning Label 2. Bluetooth Label 3. Product Identification Label 4. Reserved 5. Windows CE License Label 6. Tamper Proof Label The tamper-proof label covers the top right screw in the battery bay. -
Page 10: Laser Warnings And Labels
Do not look into the laser’s lens. Do not stare directly into the laser beam. Do not remove the laser caution labels from the MX9. Do not connect the laser barcode aperture to any other device. The laser barcode aperture is certified for use with the MX9 only. -
Page 11: Batteries
MX9. An MX9 will retain data, while the main battery is removed and replaced with a fully charged main battery, for 5 minutes. Important: When the backup battery power is Low or Very Low connect the AC adapter to the MX9 before replacing the main battery. -
Page 12: Hotswap The Main Battery
Warning: Never replace (hotswap) the MX9 battery in a hazardous location. Place the MX9 in Suspend Mode. LXE recommends any work in progress be saved prior to replacing the battery pack. Simply replace the discharged battery with a fully-charged battery. An MX9, with a fully charged backup battery, will retain data during a battery hotswap for 5 minutes. -
Page 13: Regulatory Notices And Safety Information
Li-Ion Battery When disposing of the MX9 main battery, the following precautions should be observed: The battery should be disposed of properly. The battery should not be disassembled or crushed. The battery should not be heated above 212°F (100°C) or... -
Page 14: Rf Notices
Information to User A label on the exterior of the device should resemble one of the labels shown below (the label contains the LXE part number of the installed radio card). The labels shown below and affixed to the device, identify where the device may be used and where its use is restricted. -
Page 15: Laser Light Safety Statement
Advertencia: Este producto usa luz de láser. Las etiquetas se proveen en la máquina exploradora. Por favor, lea detenidamente la explicación para las precauciones. (ES) Waarschuwing: Dit product gebruikt laserlicht. Een van de volgende labels is op de scanner aangebracht. Lees a.u.b. de waarschuwing onder Oppassen. (NL) E-EQ-MX9OGWW-C [ 12 ] MX9 User Guide... - Page 16 Laser Light Safety Statement E-EQ-MX9OGWW-C [ 13 ] MX9 User Guide...
-
Page 17: Index
Labels Connect or Remove the Battery Pack Front Handstrap Hotswap the Main Battery Input / Output Connector Laser Light Safety Statement Laser Warnings and Labels Regulatory Statements Remove Battery RF Notices E-EQ-MX9OGWW-C Draft 01 [ 14 ] MX9 User Guide...