Status Tab; Figure 3-49 Manual Settings Properties Panels; Figure 3-50 Status Display - LXE MX8 Reference Manual

Wavelink Avalanche Enabler Configuration
Network
For device-specific descriptions of these Enabler parameters, refer to Chapter 5 "Wireless Network Configuration".
When you download a profile that is configured to manage network and wireless settings, the
Enabler will not apply the manage network and wireless settings to the adapter unless the global
Manage wireless settings and Manage network settings options are enabled on the Adapters
panel (see Figure titled Avalanche Enabler Adapters Options – Network). Until these options are
enabled, the network and wireless settings are controlled by the third-party software associated
with these settings.

Status Tab

The Status panel displays the current status of the mobile device network adapter selected in the
drop down box. Note the availability of the Windows standard Refresh button. When tapped, the
signal strength, signal quality and link speed are refreshed for the currently selected adapter. It
also searches for new adapters and may cause a slight delay to refresh the contents of the drop-
down menu.
Link speed indicates the speed at which the signal is being sent from the adapter to the mobile
device. Speed is dependent on signal strength.
E-EQ-MX8RG-A
LXE does not recommend enabling Manage Wireless Settings.

Figure 3-49 Manual Settings Properties Panels

Figure 3-50 Status Display

DNS
139
Wireless
MX8 Reference Guide