Hardware Setup
3.
To AC wall outlet -- Plug the 2-prong cable into any AC wall outlet with a dependable
power source.
AC power is now being supplied to the AC power adapter and the cradle.
Input :100-240V, 50-60 Hx, 0.5A
Output : 5V, 3A
Indoor, dry location use only.
Connecting the Multipurpose USB / Power Cable
Connector A
Connector B
Connector C
E-EQ-MX8RG-A
Figure 1-15 Connect Power Cable to the Cradle
Figure 1-16 Connect the USB / Power Cable to the MX8 Port
Squeeze the clips on the connector cable to open the catches in the connector
assembly. Firmly press Connector A into the connector at the base of the MX8.
Release the clips in the connector cable. Test the connection for stability before
connecting to USB
Firmly push the power cable connector pin into connector B. Plug the 2-prong
cable into an AC wall outlet.
Insert the USB Type A plug into an appropriate USB port on a desktop/laptop
computer for ActiveSync communication.
17
MX8 Reference Guide