Mx8 Multi-Charger (Optional); Multi-Charger Leds - LXE MX8 Reference Manual

MX8 Multi-Charger (Optional)

MX8 Multi-Charger (Optional)
Please refer to the MX8 Multi-Charger User's Guide.
The multi-charger requires an external power source before battery pack charging can commence.
The battery pack begins to recharge as soon as it is placed in the battery well. There are four
Charging bays.
The external AC power supply cable connection for the multi-charger is shipped with the multi-
charger. The multi-charger AC adapter and cable is only compatible with the MX8 multi-charger.
The main battery pack can be charged in either 1) a powered MX8 Multi-Charger or 2) by a
powered AC Adapter connected by multipurpose cables to the mobile device.
Insert the main battery into any charging well in the Multi-Charger. Remove the battery pack by
pulling the battery straight up and out.
Do not "slam" or drop the battery into the charging well. Do not allow foreign material to fall or
spill into the charging well. Failure to follow these instructions can result in damage to the main
battery pack or the Multi-Charger.

Multi-charger LEDs

The status of the charge operation is communicated by the LED located at the base of each
charging well.
Flashing Red on any
Please refer to the MX8 Multi-Charger User's Guide for instruction.
E-EQ-MX8RG-A
LED Indication
Off No Battery/power
Green Charged
Red Charging
Yellow Standby
station
Battery pack not plugged in or no power
applied.
Battery pack fully charged.
Battery pack charging.
Battery pack temperature out of range.
Fault Battery pack fault or failure.
Description
MX8 Reference Guide
63