Figure 3-48 Avalanche Network Profile Displayed - LXE MX8 Reference Manual

138
Use Avalanche
Network Profile
Avalanche Icon
Use Manual Settings
Properties Icon
Note:
MX8 Reference Guide
The Enabler will apply all network settings sent to it by the
Avalanche Mobility Center Console.
Selecting the Avalanche Icon will access the Avalanche Network
Profile tab which will display current network settings.

Figure 3-48 Avalanche Network Profile Displayed

When enabled, the Enabler will ignore any network or wireless
settings coming from the Avalanche Mobility Center Console and use
only the network settings on the mobile device.
Selecting the Properties icon displays the Manual Settings Properties
dialog applet. From here, the user can configure Network, DNS and
Wireless parameters using the displays shown below:
A reboot may be required after enabling or disabling these options.
Wavelink Avalanche Enabler Configuration
E-EQ-MX8RG-A