Wpa Psk Authentication - LXE MX8 Reference Manual

Summit Client Configuration

WPA PSK Authentication

Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Profile tab.
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to None.
Set Encryption to WPA PSK.
Tap the WEP keys/PSK Keys button.
Enter the Passphrase in the PSK Entry popup text entry box. This value can be a 64 hex character
or an 8-63 byte ASCII value. Tap OK
Tap the Commit button to save the new profile configuration.
Perform a warm boot (or Suspend/Resume) to connect using the new profile configuration.
E-EQ-MX8RG-A
Figure 5-21 Configure a Summit Profile with WPA PSK Encryption
Figure 5-22 Summit PSK Entry Dialog
189
MX8 Reference Guide