Applock Registry Settings - LXE MX8 Reference Manual

AppLock Registry Settings

Message
X after Ctrl+L
Ret from password <#>
Decrypt data len <#>
Window handle to
enumwindows=%x
WM_WINDOWPOSCHG
adjusted=%x
AppLock Registry Settings
This system application runs at startup via the launch feature of LXE Windows CE devices. When
the launch feature is installed on the mobile device, the following registry settings are created. The
launch feature registry settings are embedded in the mobile device OS image:
HKEY_LOCAL_MACHINE\\Software\\LXE\\Persist\\Filename=AppLock.exe
HKEY_LOCAL_MACHINE\\Software\\LXE\\Persist\\Installed=
HKEY_LOCAL_MACHINE\\Software\\LXE\\Persist\\FileCheck=
AppLock registry settings identify the application that is going to be locked and any parameters
that are needed by the application. These registry settings are as follows:
HKEY_LOCAL_MACHINE\\Software\\LXE\\Administration\\AppName
HKEY_LOCAL_MACHINE\\Software\\LXE\\AppCommandLine=
In addition to the registry settings needed to specify the application, additional registry settings are
needed to store the configuration options for AppLock. These options include, among others, the
administrator's password and hotkey.
HKEY_LOCAL_MACHINE\\Software\\LXE\\AppLock\\Administration\\HotKey=
HKEY_LOCAL_MACHINE\\Software\\LXE\\AppLock\\Administration\\EP=
E-EQ-MX8RG-A
Explanation and/or corrective action
Processing the backdoor entry.
Return value from password dialog.
Length of decrypted password.
The window handle that is passed to the enumeration
function. This message can be used by engineering with
other development tools to trouble shoot application
lock failures.
Output the window size after it has been adjusted by
AppLock
229
Level
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
MX8 Reference Guide