Connect -- Initial Install Process; Change Connection Parameters - LXE MX8 Reference Manual

116

Connect -- Initial Install Process

Connect the correct** cable to the PC (the host) and the MX8 (the client). Tap the
| Communication | Connect icon on the MX8.
The MX8 connection is made using
**
When the desktop/laptop computer and the MX8 successfully connect, the initial ActiveSync
process is complete.

Change Connection Parameters

Tap the
From the popup list, choose
Option
USB (Default)
COM1 @ 57600
• Tap OK and ensure the check box for "Enable direct connections to the desktop computer" is
checked.
• Tap OK to return to Settings.
• Select Scanner and ensure the integrated scanner is set to a port that is different than the
"Connect" port (COM 1).
MX8 Reference Guide
Cables for initial ActiveSync Configuration:
USB Client to PC/Laptop
Serial Client to PC/Laptop
| Settings | Control Panel | PC Connection. Tap the Change Connection button.
Description
This will set up the MX8 to use the USB port direct.
This will set up the MX8 to use COM 1 direct at 57600 baud
ActiveSync / Get Connected Process
| Programs | Communication | ActiveSync.
MX8A051MULTICBLUSB
MX8A055MULTICBLDA9F
| Programs
E-EQ-MX8RG-A