LXE MX8 Reference Manual page 239

Lxe mx8 microsoft windows ce 5.0 equipped handheld computer
Hide thumbs Also See for MX8:
Table of Contents

Advertisement

Error Messages
Message
Exit ToUser-Registry read failure
Exit verify password-no pwd set
Exit verify password-response from
dialog
Found taskbar
Getting address of keyboard hook
init procedure
Getting configuration from registry
Getting encrypt pwd length
Hook wndproc failure
Hook wndproc of open app failure
Hot key event creation failure
Hot key pressed
Hot key pressed
Hot key set event failure
Hotkey press message received
In app hook:WM_SIZE
In app
hook:WM_WINDOWPOSCHANG
ED
Initializing keyboard hook
procedure
E-EQ-MX8RG-A
Explanation and/or corrective action
The AppName value does not exist in the registry so
user mode cannot be entered.
Exiting password verification.
Exiting password verification.
The handle to the taskbar has been found so that
AppLock can disable it in user mode.
AppLock is retrieving the address of the keyboard hook.
The AppLock configuration is being read from the
registry. This occurs at initialization and also at entry
into user mode. The registry must be re-read at entry
into user mode in case the administration changed the
settings of the application being controlled.
The length of the encrypted password is being
calculated.
AppLock is unable to lock the application. This could
happen if the application being locked encountered an
error after performing its initialization and shut itself
down prior to being locked by AppLock.
The application is open, but AppLock cannot lock it.
The Admin applet is unable to create the hotkey
notification.
Processing the hotkey and backdoor entry
Processing the hotkey and backdoor entry
When the administrator changes the hotkey
configuration the hotkey controller must be notified.
This notification failed.
The user just pressed the configured hotkey.
In addition to preventing the locked application from
exiting, AppLock must also prevent the application from
enabling the taskbar and resizing the application's
window. This message traps a change in the window
size and corrects it.
In addition to preventing the locked application from
exiting, AppLock must also prevent the application from
enabling the taskbar and resizing the application's
window. This message traps a change in the window
position and corrects it.
AppLock is calling the keyboard hook initialization.
225
Level
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_PROCESSING
LOG_EX
LOG_EX
LOG_PROCESSING
MX8 Reference Guide

Advertisement

Table of Contents
loading

Table of Contents