LXE MX8 Reference Manual page 228

214
Option
Launch
Button
Global Key
Global
Delay
Input Panel
Clear
Button
Scroll
Buttons
MX8 Reference Guide
Explanation
See following section titled Launch Button.
Note: AppLock Administrator Control panel file Launch option does not inter-
relate with similarly-named options contained in other LXE Control Panels.
Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press
when switching between applications. The Global Key default key sequence
must be defined by the AppLock Administrator. The Global key is presented to
the end-user as the Activation key.
Default is 10 seconds. Enter the number of seconds that Applications must wait
before starting to run after reboot.
Note: Delay (Global) may not be available in all versions of AppLock. You can
simulate a Global Delay function by setting a delay for the first application
(lowest Order) launched and setting the delay to 0 for all other applications. See
Boot Options.
Default is Disabled. Enable (check) to show the Keyboard option on the
Switchpad menu. When enabled the input panel cannot be enabled or disabled
for each individual application, and is available to the user for all configured
applications.
Tap the Clear button to clear all currently displayed Filename or Application
information. The Global settings are not cleared.
Use the left and right scroll buttons to move from application setup screen to
application setup screen. The left and right buttons update the information on the
screen with the previous or next configured application respectively.
Multi-Application Configuration
E-EQ-MX8RG-A