Main Tab - LXE MX8 Reference Manual

168

Main Tab

Factory Default Settings
Main
Admin Login
Radio
Active Config/Profile
Regulatory Domain
The Main tab displays information about the wireless client device including:
• SCU (Summit Client Utility) version
• Driver version
• Radio Type (the radio is an 802.11 b/g radio)
• Regulatory Domain
• Copyright Information can be accessed by tapping the About SCU button
• Active Config profile / Active Profile name
• Status of the client (Down, Associated, Authenticated, etc).
The Active Profile can be switched without logging in to Admin mode. Selecting a different
profile from the drop down list does not require logging in to Administrator mode. The profile
must already exist. LXE recommends performing a Suspend/Resume function when changing
profiles. Profiles can be created or edited after the Admin login password has been entered and
accepted.
When the profile named "ThirdPartyConfig" is chosen as the active profile, the Summit Client
Utility passes control to Windows Zero Config for configuration of all client and security settings
for the network module. See Wireless Zero Config Utility later in this chapter for Wireless Zero
Config instruction.
The Disable Radio button can be used to disable the network card. Once disabled, the button label
changes to Enable Radio. By default the radio is enabled.
The Admin Login button provides access to editing wireless parameters. Profile and Global may
only be edited after entering the Admin Login password.
The password is case-sensitive.
Once logged in, the button label changes to Admin Logout. To logout, either tap the Admin
Logout button or exit the SCU without tapping the Admin Logout button.
MX8 Reference Guide
SUMMIT
Enabled
Default
FCC or ETSI
Figure 5-2 SCU – Main Tab
Summit Client Configuration
E-EQ-MX8RG-A