Important Battery Information; When To Use This Guide - LXE MX8 Reference Manual

Overview

Important Battery Information

Note:
Tap | Settings | Control Panel | Battery tab.
• Until the main battery and backup battery are completely depleted, the MX8 is always drawing
power from the batteries (On).
• New batteries must be fully charged prior to use.
• Whenever possible, use the AC power adapter with the MX8 to conserve the main battery and
recharge the backup battery. The backup battery receives power from the main battery.
• When the MX8 is connected to AC power and the main battery is being hotswapped, do not
disconnect AC power from the MX8 until a main battery is secured in the battery well.
• Ni-MH backup battery replacement must be performed by qualified service personnel.

When to Use This Guide

As the reference for LXE's MX8 computer, this guide provides detailed information on its
features and functionality. Use this reference guide as you would any other source book – reading
portions to learn about the MX8, and then referring to it when you need more information about a
particular subject. This guide takes you through all aspects of installation and configuration for the
LXE MX8.
Operation and safety instructions for the general user are contained in the "MX8 User's Guide."
This chapter, "Introduction", describes this reference guide's structure, contains initial setup
instruction, briefly describes data entry processes, and explains how to get help.
Chapter 2 "Physical Description and Layout", describes the function and layout of the MX8
components, controls and connectors. Also describes the external power supplies and vehicle
mounting options for the MX8.
Chapter 3 "System Configuration" takes you through the CE 5.0 operating system setup and the
MX8 file structure. Also describes and explains initial ActiveSync processes, the Wavelink
Avalanche Enabler and MX8 specific utilities.
Chapter 4 "Scanner" describes the function, layout and setup for the integrated Scanner/Imager.
Chapter 5 "Wireless Network Configuration" details 2.4GHz networked client setup.
Configuration for WEP and WPA is included.
Chapter 6 "AppLock" covers all aspects of the LXE AppLock program.
Appendix A "Key Maps" describes the key press sequences for the keypad. Custom Key
mapping instruction is included.
Appendix B "Technical Specifications" lists MX8 technical specifications.
E-EQ-MX8RG-A
The mobile device's backup battery maintains its charge by drawing power from the
main battery pack. Always store unused devices with a fully charged main battery pack
installed. LXE recommends an in-use mobile device be frequently connected to an
external power source to maintain optimum power levels in the main battery pack and the
backup battery. When the backup battery and main battery pack are dead, the mobile
device reverts to the last saved setup defaults when a fully charged main battery pack is
installed and the device is powered On again.
3
MX8 Reference Guide