Figure 5-18 Peap/Mschap Credentials - LXE MX8 Reference Manual

Summit Client Configuration
To use Stored Credentials, tap the Credentials button.
No entries are necessary for Sign-On Credentials as the user will be prompted for the User name
and Password when connecting to the network.
Enter the Username or Domain\Username in the Credentials popup text entry box, if desired.
Enter the Password, if desired. Leave the CA Certificate Filename blank for now. Tap OK. Tap
Commit.
Note:
If using the Windows certificate store:
• Tap the Use MS store checkbox. The default is to use the Full Trusted Store.
• To select an individual certificate, click on the Browse [ . . .] button.
• Uncheck the Use full trusted store checkbox.
• Select the desired certificate and tap Select. You are returned to the Credentials screen.
If using the Certs Path option:
• Leave the Use MS store box unchecked.
• Enter the certificate filename in the CA Cert textbox.
Tap OK then tap Commit.
For information on generating a Root CA certificate, please see Root CA Certificate later in this
chapter.
Perform a Warm Boot (or Suspend/Resume) function to connect using the new profile
configuration.
The device should be authenticating the server certificate and using PEAP/MSCHAP for the user
authentication.
See Also: Sign-On vs. Stored Credentials earlier in this chapter if the username and password are
left blank during setup.
E-EQ-MX8RG-A

Figure 5-18 PEAP/MSCHAP Credentials

The date must be properly set on the device to authenticate a certificate.
187
MX8 Reference Guide