The Keypad - LXE MX8 Reference Manual

The Keypad

The Keypad
The keypad is installed and configured by LXE to your specifications.
• When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft
sticky key or the Caps key sequence (Blue+Tab) for upper case alphabetic characters.
• Pressing the Alph key forces "Alpha" mode for the 2,3,4,5,6,7,8, and 9 keys. The 1 and 0 keys
continue to place a 1 and 0 into the text field.
• To create a combination of numbers and letters before pressing Enter, remember to tap the
Alph key to toggle between Alpha and Numeric mode.
• When using a sequence of keys that do not include the Alph key but does include a sticky key,
press the sticky key first then the rest of the key sequence.
The keymaps (keypress sequences) are located in "Appendix A – Key Maps
E-EQ-MX8RG-A
Figure 2-6 The 32-Key Keypad
1 System Status LED
2 Scan Button
3 Enter Button
4 On / Off Button
5 Scan Status LED
6 Speaker
7 Alpha Status LED
8 Diamond Keys
9 Orange Key (Sticky)
10 Blue Key (Sticky)
MX8 Reference Guide
53