LXE MX8 Reference Manual page 165

Barcode Tab
symbologies screen are in effect for that symbology. In other words, either the settings for the
configured symbology will be used, or the default settings are used, not a combination of the two.
If a symbology has not been configured (does not have an * next to it) the settings for "All" are
used which is not necessarily the defaults.
Parameters
Enable
Min
Max
E-EQ-MX8RG-A
This checkbox enables (checked) or disables (unchecked) the symbology field.
The scanner driver searches the beginning of the barcode data for the type of ID
specified in the Barcode tab – Enable Code ID field (AIM or Symbol) plus any
custom identifiers.
When a code ID match is found as the scanner driver processes incoming
barcode data, if the symbology is disabled, the barcode is rejected. Otherwise,
the other settings in the dialog are applied and the barcode is processed. If the
symbology is disabled, all other fields on this dialog are grayed.
When there are no customized settings, and the Enable checkbox is unchecked
(All is selected and no other settings are customized) a confirmation dialog is
presented to the user "You are about to disable all scan input – Is this what you
want to do?". Tap the Yes button or the No button. Tap the X button to close the
dialog without making a decision.
If there are customized settings, uncheck the Enable checkbox for the All
symbology. This results in disabling all symbologies except the customized
ones.
This field specifies the minimum length that the barcode data (not including
Code ID) must meet to be processed. Any barcode scanned that is less than the
number of characters specified in the Min field is rejected. The default for this
field is 1.
This field specifies the maximum length that the barcode data (not including
Code ID) can be to be processed. Any barcode scanned that has more characters
than specified in the Max field is rejected. The default for this field is All
(9999). If the value entered is greater than the maximum value allowed for that
symbology, the maximum valid length will be used instead.
151
MX8 Reference Guide