Wireless Zero Config Utility And The Summit Client - LXE MX8 Reference Manual

Summit Client Configuration

Wireless Zero Config Utility and the Summit Client

The WZC utility has an icon in the toolbar that looks like networked computers with a red X
through them, indicating the Wireless Zero Config application is enabled and the MX8 is not
connected to a network.
You can use either the Wireless Zero Configuration Utility or the Summit Client Utility to connect
to your network.
LXE recommends using the Summit Client Utility to manage wireless connectivity.
To use Wireless Zero Config, first open the Summit Client Utility.
1. Select ThirdPartyConfig in the Active Profile drop down box.
2. A message appears that a Power Cycle is required to make settings activate properly.
3. Tap OK.
4. Tap the Power button to place the MX8 in Suspend, then tap the Power button to wake the
MX8 from Suspend mode.
The Wireless Zero Config utility begins.
E-EQ-MX8RG-A
193
MX8 Reference Guide