Profile Tab; Buttons - LXE MX8 Reference Manual

170

Profile Tab

Note:
Factory Default Settings
Profile
SSID
Client Name
Power Save
Tx Power
Bit Rate
Radio Mode
Auth Type
EAP type
Encryption
When logged in as an Admin (see Admin Login), use the Profile tab to manage profiles. When not
logged in as an Admin, the parameters can be viewed, and cannot be changed. The buttons on this
tab are dimmed if the user is not logged in as Admin.

Buttons

Button
Commit
Credentials
Delete
New
Rename
MX8 Reference Guide
Tap the Commit button to save changes before leaving this panel or the SCU. If the panel
is exited before tapping the Commit button, changes are not saved!
Default
Blank
Blank
Fast
Maximum
Auto
BG Rates Full
Open
None
None
Figure 5-4 SCU – ProfileTab
Function
Saves the profile settings made on this screen. Settings are saved in the profile.
Allows entry of a username and password, certificate names, and other
information required to authenticate with the access point. The information
required depends on the EAP type.
Deletes the profile. The current active profile cannot be deleted and an error
message is displayed if a delete is attempted.
Creates a new profile with the default settings (see Profile Parameters) and
prompts for a unique name. If the name is not unique, an error message is
displayed and the new profile is not created.
Assigns a new, unique name. If the new name is not unique, an error message is
displayed and the profile is not renamed.
Summit Client Configuration
E-EQ-MX8RG-A