Subsequent Use - LXE MX8 Reference Manual

Bluetooth

Subsequent Use

Note:
1. Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZ Pairing application.
2. Tap the Settings tab.
3. Tap the Discover button. When the Bluetooth module begins searching for in-range Bluetooth
devices, the button name changes to Stop. Tap the Stop button to cancel the Discover function
at any time.
4. The discovered devices are listed in the Bluetooth Devices window.
5. Doubletap a Bluetooth device in the Discovered window to open the device properties menu.
6. Tap Pair as Scanner to set up the MX8 to receive scanner data.
7. Tap Pair as Printer to set up the MX8 to send data to the printer.
8. Tap Disconnect to stop pairing with the device. Then tap Delete. The device name and data is
removed from the MX8 Bluetooth Devices list after the next Suspend/Resume.
9. Upon successful pairing, the selected device may react to indicate a successful connection.
The reaction may be an audio signal from the device, flashing LED on the device, or a dialog
box is placed on the MX8 display.
10. Whenever the MX8 returns from Suspend Mode, all previously paired, live, Bluetooth devices
in the vicinity are paired, one at a time, with the MX8. If the devices cannot connect to the
MX8 before the re-connect timeout time period expires (default is approximately 20 seconds
for each paired device) there is no indication of the continuing disconnect state if Report
Failure to Reconnect is disabled.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.
E-EQ-MX8RG-A
Taskbar and Bluetooth device Icon states change as Bluetooth devices are discovered,
pair, connect and disconnect. A taskbar Bluetooth icon with a red background indicates
Bluetooth is active and not paired with any device. A device icon with a red background
indicates a disconnected paired device.
31
MX8 Reference Guide