LXE MX8 Reference Manual page 190

176
Parameter
TX Diversity
Roam Trigger
Roam Delta
Roam Period
Frag Thresh
RTS Thresh
Ping Payload
Ping Timeout
ms
Ping Delay ms
MX8 Reference Guide
Default Function
On How to handle antenna diversity when transmitting
packets to the Access Point.
Options are: Main only (use the main antenna only),
Aux only (use the auxiliary antenna only), or On (use
diversity or both antennas).
-65 dBm If signal strength is less than this trigger value, the
client looks for a different Access Point with a stronger
signal.
Options are: -50 dBm, -55, -60, -65, -70, -75, -80, -85,
-90 dBm or Custom.
10 dBm The amount by which a different Access Point signal
strength must exceed the current Access Point signal
strength before roaming to the different Access Point is
attempted.
Options are: 5 dBm, 10, 15, 20, 25, 30, 35 dBm or
Custom.
10 sec The amount of time, after association or a roam scan
with no roam, that the radio collects Received Signal
Strength Indication (RSSI) scan data before a roaming
decision is made.
Options are: 5 sec, 10, 15, 20, 25, 30, 35, 40, 45, 50,
55, 60 seconds or Custom.
2346 If the packet size (in bytes) exceeds the specified
number of bytes set in the fragment threshold, the
packet is fragmented (sent as several pieces instead of
as one block). Use a low setting in areas where
communication is poor or where there is a great deal of
wireless interference.
Options are: Any number between 256 bytes and 2346
bytes.
2347 If the packet size exceeds the specified number of bytes
set in the Request to Send (RTS) threshold, an RTS is
sent before sending the packet. A low RTS threshold
setting can be useful in areas where many client
devices are associating with the Access Point.
Options are: Any number between 0 and 2347.
32 bytes Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 256, 512, or 1024
bytes.
5000 The amount of time, in milliseconds, that a device will
be continuously pinged. The Stop Ping button can be
tapped to end the ping process ahead of the ping
timeout.
Options are: Any number between 0 and 30000 ms.
1000 The amount of time, in milliseconds, between each
ping after a Start Ping button tap.
Options are: Any number between 0 and 30000 ms.
Summit Client Configuration
E-EQ-MX8RG-A