Vibration Tab
Vibration Tab
Access:
Factory Default Settings
Vibration
Good Scan Vibration
Bad Scan Vibration
Enable short, medium or long duration when a tactile response is desired on a good scan, bad scan
or both event is desired. Scan sounds are accompanied by a tactile response when the internal
scanner Sound parameter is enabled.
Adjust the settings and tap the OK box to save the changes. The changes take effect immediately.
E-EQ-MX8RG-A
| Settings | Control Panel | Scanner | Vibration tab
Disabled, Off
Enabled, Long
Figure 4-11 Scanner Control / Vibration tab
163
MX8 Reference Guide