Scanner / Imager Aperture; Trigger Handle; Figure 1-3 Scanner Aperture; Figure 1-4 Trigger Handle (Optional) - LXE MX8 Reference Manual

Components

Scanner / Imager Aperture

CAUTION: Never stare directly into the beam aperture. Read "Laser Warnings and Labels" in
Identify the type of integrated imager or laser scanner installed in the MX8 by looking at the type
of plastic lens covering the Beam aperture.
•
•
•
•

Trigger Handle

1
2
Note:
Refer to the Trigger Handle installation instruction later in this chapter.
E-EQ-MX8RG-A
the MX8 User's Guide before using the scanner/imager.

Figure 1-3 Scanner Aperture

The No-Scanner option has an opaque lens protecting the MX8 internal components.
The SE955 laser barcode scanner has a red lens protecting the laser engine.
The EV-15 integrated imager has a clear lens protecting the imager engine.
The 5380SF 2D imager has an opaque lens protecting the imager engine.

Figure 1-4 Trigger Handle (Optional)

Scan Aperture
Trigger
Either the trigger handle is attached to the MX8 or the handstrap is attached, not both.
LXE recommends that, in the absence of a trigger handle, the handstrap be used at all
times. The stylus is tethered to the handstrap or the trigger handle.
3 Handle
4 Tether Attach Point
MX8 Reference Guide
7