Operation; Quick Start; Power Up; Please Wait" Messages - LXE 2325 Installation And Operator's Manual

Lxe 2325 handheld computer installation and operator’s guide
Hide thumbs Also See for 2325:
Table of Contents

Advertisement

6

Operation

Quick Start

This section's instructions are based on the assumption that your new 2325 is pre-configured and
requires only accessory installation (e.g. external barcode scanner) and a power source.
In general, the sequence of events is:
1. Attach the Locking Screw for the PC Card Slot Cover.
2. Insert NiMH battery. A battery icon is displayed at the top right corner of the display
3. Turn the 2325 on by pressing the Power key.
4. Turn the 2325 off by pressing the Power key again.

Power Up

The first time you turn the unit on, you may see the following message:
Initial power-up or
critical data loss.
Drive D formatted.
Press any key...
This message appears with normal operation and does not indicate a problem. Just press the
[Enter] key, and the unit will continue to boot up.
This message will also appear when you place new or recharged batteries in the unit after the
backup battery has been drained. Again, this is normal and not a problem.

"Please Wait" Messages

With certain types of PC cards installed, the 2325 performs various operations on the card
whenever you turn it on or off. While these operations are happening, the unit displays a message
in reverse video indicating that it is powering on or off. When turning the unit on, wait until the
message disappears before using the unit. When turning the unit off to replace the batteries, wait
until the message disappears before removing the batteries.

Auto-Shutoff

The 2325 has an automatic shutoff feature that helps conserve battery life when the unit is not
being used. When a specified amount of time (default is 5 minutes) has passed since a key or
trigger has been pressed, the unit turns itself off. All data in memory is maintained. Press the
Power button to turn the unit back on.
2325 Installation and Operator's Guide
Battery full
icon
when the 2325 is running with a charged battery.
Instructions for changing the Auto-Off Timer are located in Appendix C in the
2325 Reference Guide.
Power key
E-EQ-2325OGWW-F-ARC
Operation

Advertisement

Table of Contents
loading

Table of Contents