Communication; Activesync; Connect; Start / Stop Ftp Server - LXE MX8 Reference Manual

72

Communication

Access:
Note:

ActiveSync

After a relationship (partnership) has been established with the MX8 and a desktop computer,
ActiveSync can synchronize using the radio link, serial port, or USB port on the MX8.
Refer to "ActiveSync / Get Connected Process" later in this chapter for more information and
instruction.
To initiate synchronization (or radio link) from the mobile device that already has a relationship
with the desktop computer, tap
process.
For more information about using ActiveSync on your desktop computer, open ActiveSync, then
open ActiveSync Help.

Connect

Connect is used to initiate a hardwired connection to a host and to create the initial partnership for
synchronizing over the radio.
The default connect setup is USB direct connect.
After a Connect setup is selected,
connect to a host.
See Also: Cold Boot and Loss of Host Re-connection

Start / Stop FTP Server

Access:
Server
These shortcuts call the Services Manager to start and stop the FTP server. The server defaults to
Off (for security) unless it is explicitly turned on from the menu.
MX8 Reference Guide
| Programs | Communication
Some communication menu options require an external modem connection to the MX8.
Modems are not available from LXE nor supported by LXE.
| Programs | Communication | Start FTP Server or Stop FTP
| Programs | Communication | ActiveSync to begin the
| Programs | Communication | Connect will start to
Start Menu Program Options
E-EQ-MX8RG-A