LXE MX8 Reference Manual page 186

172
Parameter
Tx Power
Bit Rate
Radio Mode
Auth Type
EAP Type
Encryption
MX8 Reference Guide
Default Explanation
Maximum Maximum setting regulates Tx power to the Max power setting
for the current regulatory domain.
Options are: Maximum, 50mW, 30mW, 20mW, 10mW, 5mW,
or 1mW.
Auto Setting the rate to Auto will allow the Access Point to
automatically negotiate the bit rate with the client device.
Options are: Auto, 1 Mbit, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or
54 Mbit.
BG Rates Specify 802.11g and/or 802.11b when communicating with the
Full Access Point.
Options are: B rates only, BG Rates full, G rates only, BG
optimized.
Open 802.11 authentication type used when associating with the
Access Point.
Options are: Open, LEAP, or Shared key.
None Extensible Authentication Protocol (EAP) type used for 802.1x
authentication to the Access Point.
Options are: None, LEAP, EAP-FAST, PEAP-MSCHAP,
PEAP-GTC, or EAP-TLS.
Note: EAP Type chosen determines whether the Credentials
button is active and also determines the available entries in the
Credentials pop-up window.
None Type of encryption to be used to protect transmitted data.
Options are: None, Manual WEP, Auto WEP, WPA PSK,
WPA TKIP, WPA2 PSK, WPA2 AES, CCKM TKIP, CKIP
Manual, CKIP Auto, Manual WEP CKIP, or Auto WEP CKIP.
Note: The Encryption type chosen determines if the WEP
Keys / PSK Keys button is active and also determines the
available entries in the WEP or PSK pop-up window.
Summit Client Configuration
E-EQ-MX8RG-A