Mx8 With Label; Mx8 Without Label; Figure 1-27 About Tab And Bluetooth Address - LXE MX8 Reference Manual

34

MX8 with Label

If the MX8 has a Bluetooth address barcode label attached, follow these steps:
1. Scan the Bluetooth address barcode label, attached to the MX8, with the LXE Bluetooth
mobile scanner.
2. If this is the first time the Bluetooth scanner has scanned the MX8 Bluetooth label, the
devices are paired. See section titled "Bluetooth Beep and LED Indications". If the devices do
not pair successfully, go to the next step.
3. Open the LXEZ Pairing panel [Start | Settings | Control Panel | Bluetooth].
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Doubletap the Bluetooth scanner until the right-mouse-click menu appears.
6. Select Pair as Scanner to pair the MX8 with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled "Bluetooth Beep and LED Indications".
Note:

MX8 without Label

If the MX8 Bluetooth address barcode label does not exist, follow these steps to create a unique
Bluetooth address barcode for the MX8:
First, locate the MX8 Bluetooth address by tapping Start | Settings | Control Panel | Bluetooth |
About tab.
Next, create a Bluetooth address barcode label for the MX8
The format for the barcode label is as follows:
• Barcode type must be Code 128.
• FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B and
then the Bluetooth address (12 hex digits, no colons). For example, LnkB0400fd002031.
Create and print the label.
Scan the MX8 Bluetooth address barcode label with the Bluetooth barcode reader.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled "Bluetooth Beep and LED Indications".
Note:
1
Free barcode creation software is available for download on the world wide web. Search using the keywords
"barcode create".
MX8 Reference Guide
After scanning the MX8 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.

Figure 1-27 About tab and Bluetooth Address

After scanning the MX8 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
1
.
E-EQ-MX8RG-A
Bluetooth