Eap-Tls Authentication - LXE MX8 Reference Manual

Summit Client Configuration
For information on generating a Root CA certificate, please see Root CA Certificate later in this
chapter.
Perform a Warm Boot (or Suspend/Resume) function to connect using the new profile
configuration.
The device should be authenticating the server certificate and using PEAP/GTC for the user
authentication.
See Also: Sign-On vs. Stored Credentials earlier in this chapter if the username and password are
left blank during setup.

EAP-TLS Authentication

Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Admin Login password and tap OK.
Tap the Profile tab.
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to EAP-TLS.
Set Encryption to WPA TKIP.
To use Stored Credentials, tap the Credentials button.
No entries are necessary for Sign-On Credentials as the user will be prompted for the User name
and Password when connecting to the network. If the username and password are left blank during
setup, see Sign-On vs. Stored Credentials earlier in this chapter.
E-EQ-MX8RG-A
Figure 5-25 Configure a Summit Profile with EAP-TLS
191
MX8 Reference Guide