Peap/Gtc Authentication - LXE MX8 Reference Manual

190

PEAP/GTC Authentication

Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Profile tab.
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to PEAP-GTC.
Set Encryption to WPA TKIP.
To use Stored Credentials, tap the Credentials button.
No entries are necessary for Sign-On Credentials as the user will be prompted for the User name
and Password when connecting to the network.
Note:
If using the Windows certificate store:
•
Tap the Use MS store checkbox. The default is to use the Full Trusted Store.
•
To select an individual certificate, click on the Browse [ . . .] button.
•
Uncheck the Use full trusted store checkbox.
•
Select the desired certificate and tap Select. You are returned to the Credentials screen.
If using the Certs Path option:
•
Leave the Use MS store box unchecked.
•
Enter the certificate filename in the CA Cert textbox.
Tap OK then tap Commit.
MX8 Reference Guide
Figure 5-23 Configure a Summit Profile with PEAP/GTC
Figure 5-24 PEAP/GTC Credentials
The date must be properly set on the device to authenticate a certificate.
Summit Client Configuration
E-EQ-MX8RG-A