Avalanche Update Using File | Settings; Menu Options - LXE MX8 Reference Manual

130

Avalanche Update using File | Settings

Access:
Use these menu options to setup the Avalanche Enabler on the mobile device. LXE recommends
changing and then saving the changes (reboot) before connecting to the network.
Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink
Avalanche Mobility Center User's Guide for details – available on the Wavelink Avalanche
website).

Menu Options

Connection
Execution
Server Contact
Startup/Shutdown
Scan Config
Display
Shortcuts
Adapters
Status
MX8 Reference Guide
Start | Avalanche | File | Settings
Enter the IP Address or host name of the Mobile Device Server. Set the
order in which serial ports or RF are used to check for the presence of
the Mobile Device Server.
Unavailable in this release. LXE recommends using AppLock, which
is resident on each Windows CE mobile device. See Chapter 6 -
AppLock.
Setup synchronization, scheduled Mobile Device Server contact,
suspend and reboot settings.
Set options for Enabler program startup or shutdown.
This option allows the user to configure Enabler settings using a
special barcode that is created by the Avalanche Mobility Center
Console. Not currently supported by LXE.
Set up the Windows display at startup, on connect and during normal
mode. The settings can be adjusted by the user.
Add, delete and update shortcuts to user-allowable applications.
Enable or disable network and wireless settings. Select an adapter and
switch between the Avalanche Network Profile and manual settings.
View the current adapter signal strength and quality, IP address, MAC
address, SSID, BSSID and Link speed. The user cannot edit this
information.
Wavelink Avalanche Enabler Configuration
E-EQ-MX8RG-A