Preface - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide

Preface

This Guide is intended for network administrator to provide referenced information about CLI
(Command Line Interface). The device mentioned in this Guide stands for T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch.
Overview of this Guide
Chapter 1: Using the CLI
Provide information about how to use the CLI, CLI Command Modes, Security Levels and some
Conventions.
Chapter 2: User Interface
Provide information about the commands used to switch between five CLI Command Modes.
Chapter 3: Stack
Provide information about the commands used for configuring stack.
Chapter 4: IEEE 802.1Q VLAN Commands
Provide information about the commands used for configuring IEEE 802.1Q VLAN.
Chapter 5: MAC-based VLAN Commands
Provide information about the commands used for configuring MAC-based VLAN.
Chapter 6: Protocol VLAN Commands
Provide information about the commands used for configuring Protocol VLAN.
Chapter 7: VLAN-VPN Commands
Provide information about the commands used for configuring VLAN-VPN (Virtual Private Network)
function.
Chapter 8: Voice VLAN Commands
Provide information about the commands used for configuring Voice VLAN.
Chapter 9: Private VLAN Commands
Provide information about the commands used for configuring Private VLAN.
Chapter 10: GVRP Commands
Provide information about the commands used for configuring GVRP (GARP VLAN registration
protocol).
Chapter 11: EtherChannel Commands
Provide information about the commands used for configuring LAG (Link Aggregation Group) and
LACP (Link Aggregation Control Protocol).
1